HighSecLabs SC21H-3 Quick Setup Manual page 15

Table of Contents SECTIONS
OPERATION
Main Menu Options
This section explains how to use the Main menu options.
Note: To clear all settings and restore the device to its
original configuration, press: Left Ctrl | Left Ctrl | F11 | r
To access the Main menu options:
1. Go into Admin mode: Left Ctrl | Left Ctrl | o
2. Right-click on any area on the screen.
The Channel menu opens:
3. Left-click on the System Menu option.
The Main menu opens:
4. Left-click on the desired option
(explained in the table below).
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1 2
Option Action
Select one of the two screen resolutions from the list.
1080 - > 1920x1200
Maximizes channel #1 to full-screen.
Full-Screen Mode
Note: To swap full-screen view to channel #2, press:
Left Ctrl | Left Ctrl | w
Maximizes the Channel #1 screen while presenting
Channel #2 screen as a floating small-sized-window
Picture-in-Picture
(picture-in-picture).
(PiP) Mode
Note: To swap positions between Channel #1 and
Channel #2, press: Left Ctrl | Left Ctrl | w
Aligns two source screens side-by-side, with Channel #1,
on the LEFT and Channel #2, on the RIGHT.
Side-By-Side Mode
Note: To swap positions between Channel #1 and
Channel #2, press: Left Ctrl | Left Ctrl | w
To reposition and resize channel the windows' layout
to create a Custom preset:
1. Select Custom Mode. The current custom-layout preset is displayed.
2. To change each channel's position –
click the left mouse button, and hold a channel window frame to
drag it to a new position.
3. To resize each channel's window size -
select a channel window and scroll the mouse middle
Custom Mode button up or down to resize it. To force:
Horizontal resize:
Align the channel window to the
bottom-screen area.
Vertical resize:
Align the channel window to the right.
4. Save layout using the Save option below.
Note: To display the Custom-Mode display preset,
press: Left Ctrl | Left Ctrl | c
Saves the Custom-mode layout.
Save
Note: To display the saved Custom-mode-display preset,
press: Left Ctrl | Left Ctrl | c
3
15