HighSecLabs SC21H-3 Quick Setup Manual page 11

Table of Contents SECTIONS
OPERATION
Switching Channel Control
To eliminate the need to press the Combiner's front-panel
buttons, you can switch between channels, using:
•
Mouse movement
•
Keyboard shortcuts
Switching Channel Control - Using a Mouse
In User mode, you can switch keyboard-and-mouse control -
from one computer to the other – by simply dragging the
mouse cursor over the computer's channel window border.
For example:
1. Display channels in side-by-side mode, by pressing:
Left Ctrl | Left Ctrl | s
2. Now, move the mouse cursor between Channels #1 and
#2, to freely switch keyboard-and-mouse control.
Note: This works in all other display modes.
Channel Channel
#1 #2
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1 2
Switching Channel Control - Using Keyboard Shortcuts
In User mode, you can switch keyboard-and-mouse control -
from one computer to the other - by using the following
keyboard shortcuts:
•
To switch control to Channel #1, press:
Left Ctrl | Left Ctrl | 1
•
To switch control to Channel #2, press:
Left Ctrl | Left Ctrl | 2, OR –
•
To swap between channels, press:
Left Ctrl | Left Ctrl | w
Note: This works in all display modes.
3
11