HighSecLabs SC21H-3 Quick Setup Manual page 4

Table of Contents SECTIONS
INSTALLATION
Installing the Combiner
Step 1 - Combiner Installation
1. Verify that all peripherals and computers are turned OFF
before connecting them to the Combiner.
2. To the Combiner's Console ports, connect the keyboard,
display, mouse, and audio peripherals.
3. To the Combiner's computer ports - for each of the two
computers - connect the keyboard, display, mouse, and
audio cables. Make sure that each computer cable is
connected to the same computer-port group.
Note: The two computers are represented by push buttons on the
product's front panel. Once the Combiner is powered ON,
you can switch peripherals between the computers, by
pressing either button.
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1 2 3
4