HighSecLabs SC21H-3 Quick Setup Manual page 12

Table of Contents SECTIONS
OPERATION
Configuring the Settings - in Admin Mode
The Admin mode lets you set, for example, the channel:
•
Display resolution
•
Window size and layout
•
Frame and title display
•
Aspect ratio
In Admin mode, the mouse CANNOT be used to control the
computers (this is done in User mode).
Note: To clear all settings and restore the device to its original
configuration, press: Left Ctrl | Left Ctrl | F11 | r
To enter Admin mode, press:
Left Ctrl | Left Ctrl | o
To let you know that you are in Admin mode
(NOT in User mode), the:
1. "Admin Mode" title appears on the lower-left-screen
corner
2. Screen channel numbers appear on the upper left-hand
corner of each channel's window frame
3. Cursor frame's border color turns RED
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1 2
Channel #1
Admin Mode
Important Notes:
1. Always use the left control key (Ctrl) unless otherwise specified.
2. Do not use the numeric keypad for toggling shortcuts, unless
otherwise specified.
3. All keyboard shortcuts refer to QWERTY keyboards. For non-
QWERTY keyboards, keep using the QWERTY layout. For example, in
an AZERTY keyboard, where the letter A is equivalent to the location
of the letter Q on a QWERTY keyboard, type { Ctrl | Ctrl | a } to
switch to tile view.
3
Channel #2
12