Appliance Connections - Worcester Greenstar 8000 Life Installation And Maintenance Instructions Manual

Carry handles
For transportation of the appliance always use the carry handles [1] and
[2] (with the control unit in the closed position).
Fig. 42 Transport, lifting and handling
Preparing the appliance installation
NOTICE
Incorrect mounting can cause material damage.
If the appliance is mounted incorrectly, it may fall off the wall.
▶ Only install the appliance on a rigid, solid wall. This wall must be able
to carry the weight of the appliance and must at least be as large as
the bearing surface of the appliance.
▶ Only use screws and wall plugs that are suitable for the wall type and
weight of the appliance.
▶ Remove the packaging, observing all notices in the packaging.
▶ Make sure that the gas type specified on the data plate is the same as
the gas type supplied.
▶ Make sure that the installation location is in the country of destination
specified on the data plate.
▶ Fasten the wall mounting plate to the wall using 4 screws and wall
plugs.
▶ Attach the pre-plumbing manifold to the lower screws and tighten.
Greenstar 8000 Life – 6720883865 (2021/11)
1
2
0010023273-001
Fig. 43 Fitting the wall mounting plate and pre-plumbing manifold
5.2

Appliance connections

WARNING
Appliance - gas connection
▶ Ensure the mains gas supply is isolated before starting any work
and follow all relevant safety precautions.
NOTICE
Appliance - hydraulic connections
▶ Ensure all water pipework, to be connected, are isolated/drained and
follow all relevant safety precautions.
▶ Be careful of plastic components when using a naked flame on
pipework.
Surplus water may be present inside the appliance due to factory testing.
External condensate pipework or internal pipe runs in unheated areas
such as lofts, basements and garages exposed to prolonged cold
temperatures should be protected ( chapter 4.5).
Installation
0010023431-003
37