Table of Contents
Advertisement
To insert the battery pack
As shown in Fig.17
1. Align the battery pack with its compartment of the tool.
2. Push the battery pack into the hole until hear click sound.
3. It means the battery pack has been locked in position.
4. Turn the battery pack compartment cover to lock position.
Wall-mount holes
As shown in Fig.18
The charger has hanging holes for convenient storage. Install screws in the wall
3.74 inches apart. Use screws sufficiently strong to hold the combined weight of the
charger and battery pack.
Before switching on and off
WARNING!
1) Wear suitable clothing, ears and eyes protecting when working with the pressure
washer.
2) Ensure that the pressure washer is functional before each use.
3) Never use the pressure washer in potentially explosive areas under any
circumstances.
4) The operating temperature must be between 41°F and 104°F.
5) Check the safe condition of the pressure washer:
– Check it for visual defects.
– Check that all parts of the pressure washer have been securely fitted.
– Check if the water connector and the high-pressure hose are tight.
YF4050PB.indd 19
Fig. 18
Fig. 18
3.74 inches
19
15-5-4
11:42
Advertisement
Table of Contents
