Table of Contents
Advertisement
Safety Instructions(continued)
WARNING
Do not look through the lens when the lamp is on.
Never look through the lens when the lamp is on. The powerful
light could adversely affect vision. Use special caution in
households where children are present.
Avoid shock or impact on the projector.
If the projector should fall, resulting in damage to the cabinet, immediately
turn off the power switch, disconnect the power plug from the power outlet
and contact your dealer.
Continued use could result in fire or electrical shock.
Do not place this projector in a container containing liquid. Do not
place flower vases, flowerpots, cups, cosmetics, liquids such as
water, etc., on top of this projector.
Do not use any power cable except those supplied with the
projector.
The use of any other power cable could result in fire or electrical
shock.
Do not shine the laser beam onto yourself or other.
The laser pointer function of projector remote control emits class
beam.
Do not look directly into the laser beam outlet or direct the laser beam
at other people. Vision can be impaired if the laser beam enters the eyes.
Especially pay attention if children are present .
High temperatures are generated when the lamp is lit; so do not
place objects in front of the lens.
Allowing the proper amount of space on the top, sides, and rear of the
projector cabinet is critical for proper air circulation and cooling of the unit.
The dimension shown here indicate the minimum space required. If the
projector is to be built into a compartment or similarly enclosed, these
minimum distances must be maintained.
6
laser
Ⅱ
Advertisement
Table of Contents
