Table of Contents
Advertisement
Installation(contiuned)
Software and Hardware install
2.Section two : Software and Hardware driver installation
Step 10-A: Turning on the projector
Remove the lens cover.
Connect the projector's power cable with the projector, and insert
the power cable into a wall socket.
Turn on the AC power switch of the projector.The power indicator
lights green and slowflashing. Projector works in standby mode.
Press the power button to turn on the projector. The power LED
begins to green and lamp LED begins to red, and the projector will
be lamped on.
POWER
33
Advertisement
Table of Contents
