Eiki LC-XIP2000 Owner's Manual page 6

Safety Instructions(continued)
WARNING
If a problem should occur
If smoke or strange odors arise, continued use could result in fire or electrical
shock. In such case, immediately turn off the power switch and then
disconnect the power plug from the power outlet. After making sure that
the smoke or odor has stopped, contact your dealer for repairs. Never
attempt to make repairs yourself because this is dangerous.
Do not use this projector if there is no image or sound, or if the sound is
distorted. Continued use could result in fire or electrical shock. In such
case, immediately turn off the power switch; disconnect the power plug
from the power outlet and contact your dealer.
If water would enter the inside of this projector, immediately turn off the
power switch, disconnect the power plug from the power outlet and contact
your dealer.
Do not install on an unstable surface.
Do not install this projector on an unstable surface
such as a wobbly stand or incline because this could
result in the projector falling and causing injury.
Do not open the cabinet.
Never open the cabinet. There is high voltage inside
which can cause electrical shock. Contact your dealer
for internal inspection, adjustment and repair.
Do not modify.
Do not modify this projector because this could result in fire or electrical shock.
Do not use in the bathroom or near water site.
Do not expose this unit to rain or use near water... for example, in the
bathroom, a wet basement, near a swimming pool, etc...
Do not insert objects into the Projector.
Do not insert metal objects through the ventilation openings, etc., of this
projector or drop such objects inside because this could result in fire or
electrical shock.
If a foreign object should enter this projector, immediately turn off
the power switch, disconnect the power plug from the power outlet
and contact your dealer.
Continued use could result in fire or electrical shock. Use special caution
in household and where children are present.
5