Manual Pc Adjustment - Eiki LC-XB40 Owner's Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
frame pointer to the PC Adjust Menu icon.
2 Press the Point ed
pointer to the item that you want to adjust and then
press the SELECT button to display the adjustment
dialog box. Press the Point
value.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point 7 8 buttons to adjust the number of total
dots in one horizontal period to match your PC image.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture
position.
Vertical
Use the Point buttons to adjust the vertical picture
7 8
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When
the image has dark bars, try this adjustment.
buttons to move the red
7 8
buttons to move the red frame
buttons to adjust the
7 8
PC Adjust Menu icon
PC Adjust Menu
Move the red framed
pointer to an item and
press the SELECT button.
Status (Stored / Free) of the
selected Mode.
Selected Mode
Press the Point
to adjust the value.
Press the SELECT button
at this item to adjust other
items.
Press the SELECT button at
the Current mode item to
show the information of the
connected computer.
Computer Input
7 8 buttons
29