Installation; Positioning The Projector; Adjustable Feet - Eiki LC-XB40 Owner's Manual

Eiki lc-xb40: user guide
Hide thumbs Also See for LC-XB40:
Table of Contents

Advertisement

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Notes:
•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain
the best image.
•All measurements are approximate and may vary from the actual sizes.
A : B = 9 : 1
4.3' (1.3 m)
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
Zoom (max)

Adjustable Feet

Projection angle can be adjusted up to approx. 9 degrees
with the adjustable feet.
Lift the front of the projector and pull the feet lock latches
on both side of the projector upward.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted manually by using the
remote control or the menu operation (see pages 24, 42).
14
32.8' (10.0 m)
22.0' (6.7 m)
16.4' (5.0 m)
10.8' (3.3 m)
100"
40"
82"
33"
33"
40"
671 x 503
813 x 610
4.3' (1.3 m)
5.2' (1.6m)
––––
4.3' (1.3m)
200"
150"
166"
124"
100"
150"
2032 x 1524
3048 x 2286
13.1' (4.0 m)
20.0' (6.1 m)
10.8' (3.3 m)
16.4' (5.0 m)
Adjustable Feet
(Inch Diagonal)
300"
Max. Zoom
Min. Zoom
247"
A
(Center)
B
200"
300"
4064 x 3048
6096 x 4572
26.6' (8.1 m)
––––
22.0' (6.7 m)
32.8' (10.0 m)
Feet Lock Latches

Advertisement

Table of Contents
loading

Table of Contents