How To Operate The On-Screen Menu - Eiki LC-XB40 Owner's Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1 Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
2
Use the Point 7 8 buttons to select a Menu icon. Use
the Point buttons to select an item in the selected
ed
menu.
3
Press the SELECT button to show the item data. Use
the Point buttons to adjust the values.
7 8
To close the On-Screen Menu, press the MENU
button again.
✔
Note:
•The selected item is not active until the SELECT button is pressed.
Top Control
MENU button
POINT buttons
SELECT button
Remote Control
SELECT button
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
Basic Operation
MENU button
POINT buttons
Menu icon
Pointer
(red frame )
21