Onchip Device Function; Onchip Super Io Function - Nvidia nForce 650i User Manual

3-7-2

OnChip Device Function

On Board HD Audio Device
IEEE 1394 Device
PCIE LAN Device
PCIE LAN Boot Rom
= = = = = = USB Controller System = = = = = =
On Chip USB
USB Keyboard/storage Support
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
HD Audio Device
This item allows you to decide to enable/disable the chipset family to support HD Audio.
The settings are: Enabled, Disabled.
IEEE 1394 Device
This item allows you to decide to enable/disable the chipset family to support IEEE1394.
The settings are: Enabled, Disabled.
USB Keyboard/Storage Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
3-7-3

OnChip Super IO Function

Onboard FDD Controller
Onboard Serial Port 1
IrDA Select
IR Duplex Mode
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard FDD Controller
Select Enabled if your system has a floppy disk controller (FDD) installed on the system board
and you wish to use it. If you install add-on FDC or the system has no floppy drive, select
Disabled in this field. The settings are: Enabled and Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and the second serial ports. The
settings are: 3F8/IRQ4, 2E8/IRQ3, , Disabled, Auto.
Phoenix – AwardBIOS CMOS Setup Utility
OnChip Device Function
Auto
Enabled
Enabled
Disabled
V1.1+ V1.2
Disabled
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Super IO Function
Enabled
3F8/IRQ4
Disabled
Half
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
39
Item Help
Item Help