NORPOLE EWCIM350S1 User Manual page 13

MAINTENANCE NOTES
1. Attention
a. If the compressor stops for any reason such as water shortage, too much ice, etc. DO NOT
restart the unit right away. To protect the compressor, wait fi ve minutes before restarting.
b. Regularly check the connectors of the water inlet and outlet tubes. Drain any surplus water that
may occur.
c. When not used for a long period of time, remove all items from the compartment and
disconnect the power supply cord from the wall outlet. Clean the interior compartment and wipe
away all water. Remove the water inlet tube from the back of the unit and drain all water. To
prevent the formation of mold, leave the door open to dry the compartment completely.
d. Clean the condenser once every six months or as needed to keep it well-ventilated. Disconnect
the ice maker and let the condenser cool before cleaning. DO NOT touch the wing shaped
pieces during cleaning to avoid injury. After removing the fl ank intake faceplate, use a cleaner
or a brush to clean it.
e. Clean the evaporator as needed.
2. Maintenance
a. Change the mainboard.
b. Change the fan.
Remove
the screws
on the
back and
the grill
Remove
the screw
on the
control
box cover.
Remove
the grill
and the
cover.
13
Figure 6
Push the
top cover
forward
and
remove it.
Remove the screw
holding the mainboard,
disconnect the wire,
then replace the board
and reattach the wire
and screw.
Figure 7
Remove the screw
holding the fan
and disconnect
any components.
Replace fan
and reconnect
components and
screw.