Specifications - NEC NP-42HD User Manual

6. Appendix

6-6. Specifications

6-6-1. Projector
Model name
Light Module
DLP Cinema Projector
®
Projection method
Panel resolution
Light type
Screen sizes
Contrast ratio
Lens adjustment function
Signal input ports
External Control
Power supply voltage
With a C1 connection Projector power supply +
(Note 3) Light power supply
With a C2 connection Projector power supply
(Note 3)
Light power supply
Input current
With a C1 connection Projector power supply +
(Note 3) Light power supply
With a C2 connection Projector
(Note 3) power supply
Light power supply
Power consumption
With a C1 connection Projector power supply +
(Note 3) Light power supply
With a C2 connection Projector power supply
(Note 3)
Light power supply
Cooling method
Noise level
Installation
Net weight
Dimensions
Environment
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards, which
are sold separately. (See page 78)
(Note 2) The value is typical.
(Note 3) A "C1 connection" is when the AC power is supplied to the projector power supply and the light power supply with a single
power cable.
A "C2 connection" is when the AC power is supplied to the projector power supply and the light power supply by separate
power cables.
* For the standards related to laser products to which this projector conforms, see the section "To ensure safe use of this unit, be
sure to read this before using the unit" (page 2).
* Note that these specifications and design can change without prior notice.
72
DLP Cinema Projector Head : NP-42HD
®
NP-24LU03
NP-NC2443ML
3 chip DLP Cinema
0.98-inch DC4K chip
4096×2160
Laser Diode
Max. 22 m
@14ft-L / Screen Gain 1.8 (Depends on setup conditions)
2000:1 with DCI specified color representation
Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus, douser
When shipped from factory: Empty (for mounting optional components) (Note 1)
RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
Single-phase AC 200V-240V 50/60Hz
Single-phase AC 100V-240V 50/60Hz
Single-phase AC 200V-240V 50/60Hz
19.1A
for AC 100 V 7.0A
for AC 200 V 3.5A
15.6A
3,182W
362W
2,820W
Air cooling system and liquid cooling system
50 dB or less
Orientation: Desk/ front, desk/ rear, ceiling/ front, ceiling/ rear
153 kg (total weight of projector and NP-24LU03 or NP-20LU03
light module. Not including the lens.)
697 mm (width) × 1,095 mm (depth) × 509.5 mm (height)
Operating temperature: 10 to 35°C
Operating humidity: 10 to 85% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 10 to 85% (non-condensing)
Operating altitude: 0 to 3000 m/9800 feet
NP-20LU03
NP-NC2043ML
method
®
Max. 20 m
USB (Type A) x 1
Interlock port x 1
Ethernet port (G-bit RJ-45) x 1
NP-18LU03
NP-NC1843ML
Max. 19 m
3,146W
352W
2,794W
144 kg (total weight of projector
and NP-18LU03 light module.
Not including the lens. )