Bradford White Brute MagnaTech BMGV1600 Installation And Operation Instructions Manual page 77

(Building Automation System)
If communication protocols are desired, this commercial
unit can be controlled and monitored through the included
Modbus ports.
The Modbus wiring must be completed according to the
diagrams shown in Section 8.
See Figure 20 on page 36.
For additional information on purchasing and setting up
Modbus and other communication protocols, contact your
Manufacturer's Representative.
Menu 21. Home Screen
Starting at the Home Screen, tap onto the Display Setup
button on the bottom right of the lead units screen.
Menu 22. Setup Menu
From the Setup menu, tap the Display Setup button.
Menu 23. Display Setup -COM2
Select the COM2 tab and make sure that the COM2 port
is enabled.
Menu 24. Display Setup -Gateway
Select the Gateway tab and make sure that the
Gateway on COM2 port is enabled. Then return to the
Homescreen.
Page 73