Resetting Camera Functions - Hitachi DZMV238EAU Service Manual

(2) How to reset
1) Set the power switch to "POWER OFF".
2) Detach the AC adapter or battery so that no power source is installed in
the DVD video camera/recorder.
3) Use a fine tipped pen, etc. to hold down the RESET button (SW3101) for
several seconds.

9.2 Resetting camera functions

Perform the following procedures after turning DVD video camera/recorder on and opening the LCD monitor (while viewing
LCD screen). Use the buttons. etc. on DVD video camera/recorder for all operations.
(1) Items to be reset
The items of system reset in the above item, except for the date function, will be reset.
(2) How to reset
Before starting:
Use the joystick to move the cursor to a menu item, and then designate it when the Disc Navigation is in operation.
(Tilt up, down, to left or right to move to an item, and press the center of joystick to designate the item.)
Operational procedure:
1) Press the MENU button to display the menu screen.
2) Choose "Initial Setup", "Reset" on the menu screen, and then designate it.
3) Following the screen, choose "YES" and designate it. (*1)
To restore the normal status, press the cancel button.
*1: Choosing "NO" and designating it will stop reset.
RESET
Fig. 9-1
1 - 17