Disc Packed In Caddy - Hitachi DZMV238EAU Service Manual

6.2 Disc packed in caddy

(1) Removing the disc from caddy
1) Insert your finger into the hole in the center of disc and lightly lift it up (in
the direction of arrow
2) Hold the disc at its edge and center hole, and remove it in the direction
of arrow (obliquely upward).
2
(2) Replacing the disc in caddy
1) Hold the disc at its edge and center hole with the printed label surface
up. (Fig. 6-2b)
2) Insert the disc under the claws at the disc hold portion in the direction of
arrow 3 . Gently push the disc in until it is completely stored.
). (Fig. 6-2a)
1
1
Fig. 6-2a
CLAWS
Fig. 6-2b
2
3
1 - 13