Hitachi DZMV238EAU Service Manual page 26

Message
Disc includes
protected scenes.
Delete scenes?
YES NO
This Program is
protected.
Delete Program?
YES NO
Data error
in a part of image file.
Repair data now?
YES NO
Found error in image file.
Repair data now?
YES NO
Data error
in a part of image file.
Repair all data now?
YES NO
Error occurred.
Please replace disc
or format disc.
Use AC adapter.
Turn off power.
Control Information Error.
*1: Formatting a disc will delete all data recorded on it.
*6: If the disc is removed while it is being recognized, the repair function of video file will be invalid.
*7: Take care with the following when repairing video file:
If the timing with which power is turned off is inappropriate, normal repair may be impossible.
If the disc has data that was recorded on a device other than this DVD video camera/recorder, normal repair may be
impossible.
The repaired data may be different from the original recorded content because of partial deletion of defective portion.
The repaired data (corrected portion in case of partial repair) loses the original date/time information because the
information of date/time was located where repair was executed.
If all repair is executed, repair will be made in the order of all videos and all photos, and the time-sequential
relationship of recorded contents will be lost.
1 - 20
Cause/condition for message to appear
Appears if the disc has a program that is write-
protected by a device other than this DVD video
camera/recorder. (This DVD video camera/recorder
is not equipped with a write-protect function.
However, the video recording format specifies that
write-protect can be set for units of program.)
A message in upper row appears if power was
turned off by mistake during video recording or
editing (deleting, dividing or combining scenes,
creating play list), and writing to file cannot be
completed normally.
A message in lower row appears if partial repair in
upper row has failed.
A message in upper row appears if power was
turned off by mistake during video recording or
editing (deleting, dividing or combining scenes,
creating play list), and writing to file cannot be
completed normally.
A message in lower row appears if all repair in
upper row has failed. In this case, data error on
disc may occur (disc is logically damaged).
Appears if AC adapter is not connected when
repairing video file: Video file can be repaired only
when AC adapter is connected. This message also
appears if AC adapter is not connected when
finalizing DVD-R disc.
Appears if mismatch has occurred between the
recorded video and the scene information because
editing was performed near the limit of disc storage
capacity on any device made by other
manufacturers; it also appears if the control
information file was operated.
Appears when reading or writing from/to recorded
file cannot be performed because of dirt of
fingerprints, dust, etc.
If the message still appears even when the control
information is updated, or the disc is cleaned, the
DVD video camera/recorder may be faulty.
Troubleshooting
If the device that has set write-protect
can be found, release the write-
protect on that device.
To execute deletion of scene or
program, choose "YES", following the
screen, and designate it.
Choosing "YES", following the
screen, will automatically repair the
video file. (*6)(*7)
(Choosing "NO" will display the
message for verifying initialization.)
Choosing "YES", following the
screen, will automatically repair the
video file. (*6)(*7)
(Choosing "NO" will display the
message for verifying initialization.)
Initialize the disc (*1), or use another
disc.
Connect AC adapter.
Update the control information.
Clean the disc, or use another disc.
Check the DVD video camera/
recorder, and repair it if necessary.