Troubleshooting - Champion CHST110 User Manual

EN
2. Rinse the cleaning plug and get the sediments out of the plug. Then apply water into steam
port to clean the boiler. After which put the cleaning plug back.
Storage
• Keep the machine in a dry, cool and ventilated place and away from flammable and explosive
objects.
• Keep properly the hood of connecting hole and put it back when pulling out the ironing brush
after the work is done, in order to prevent water and dust away from the connecting hole.
Trouble shooting
Fault
The machine does not
work or the indicator light
of switch is not lighted
The indicator light is on
but there is no steam
The accessories of iro-
ning brush are not faste-
ned
Less, discontinuous or
no steam
7
Cause
Power-off or fusion of fuse
The socket is not connected or
plugged in properly
Unfavorable connection of socket
The power switch is not turned on Turn on the power switch
The water in water tank does not
reach the designed water level
The water tank is not installed in
position
Severe inflection of steam conduit Straighten the steam conduit
Water don't flow into boiler
Unaligned grip
The water in water tank does not
reach the designed water level
The water tank is not installed in
position
Severe inflection of steam conduit Straighten the steam conduit
Solution
Check and confirm
Connect to the power supply and
ensure the plug is plugged in
thoroughly
Check whether the power socket
is normal or not
Fill water promptly
Install the water tank in position
Shaking water tank or re-placed
the water tank
Realign and fasten the snap
close
Fill water promptly
Install the water tank in position