Technical Specification; Product View - Champion CHST110 User Manual

Do not use broken or loose socket in
respect of electric shock, short circuit
and flammation.
Do not intend to refit, remove or repair
the product in respect of fire, electric
EN
shock or other injuries.
Do not insert the metal needle into
heat dissipation hole or clearance in
respect of injury caused by electric
shock.
Do not put the product in water or
damp environment or close to other
heat sources, and do not put the inner
boiler on the naked fire.
Hold the plug rather than haul the
power cord to pull out the power plug.
Do not operate on the unstable
platform or cushions which could not
receive heat in respect of injury or fire
caused by fallen ironing brush.
Wash the ironing brush after totally
cooling down to avoid scald.

Technical specification

Product type:
Rated power:
Voltage:
Steam pressure:
Steam flow:
Tank capacity:

Product View

1. Iron brush
2. Hook
3. Adjustable hanger
4. Snap close
5. Steam conduit
6. Connector
7. Switch
8. Water tank
9. Machine body
3
CHST110
1580W
220V-240V~50-60Hz
1.0bar
30-35g/min (max)
2700ml
Keep away from the steam hole to avoid
burn.
Keep it away from the children or others
unable to operate.
Remove the dust on power plug at
regular intervals, otherwise, fire accident
may occur due to poor insulation.
Do not touch the hot part, especially
the surface of steam jet of ironing brush
during or after the operation.
Do use the attached power cord which
shall not be used for other equipment.
If not in use, pull the power plug out
of the socket to avoid electric shock,
creepage and fire arising from damages
and insulation ageing.
Do not put it close to wall or furniture in
case the steam leads to color change or
distortion of which. Keep it over 30cm
away from the wall and furniture.