Champion CHST110 User Manual page 6

5. Insert the hanger into the top of support
pole, screw it to the designed height and
then screw the fixing snap close beneath
it to fasten it. Spread the hanger and screw
the adjusting snap close beneath it to
reach a designed range (Choose the height
as required).
EN
6. Insert the hook for ironing brush into the
top of support pole and tighten it.
7. Lift down the hood of connecting hole, take
out the ironing brush, align the plug of
ironing brush with and insert it into the
corresponding hole on machine body, and
tighten it clockwise. After using, please pull
out the ironing brush and cover the hood.
8. Hang the ironing brush on the hook for it.
Note: The dismounting is in a reverse order. (Put
the machine body and all accessories in
safe place during installation and
dismounting.)
Product Operations
Ironing:
1. Stand the machine assembled on flat and stable floor. Adjust the height and spread range
of the hanger as required and hang the clothes on it. Ensure there is enough water in the
water tank and the tank is located properly. Plug the plug into the power socket, select the
appropriate gear. Let the machine preheat for about 40s, waiting for steam of ironing brush.
WARNING: When the ironing brush shake or move from side to side, water bead may be
appeared on the handle of ironing brush (Danger of scalding).
2. Iron from the main part of clothes, hold the lower hem by hand gently to make the wrinkled
part flat and iron the rippled fibers out by the hot steam.
5