Product Accessories; Product Installation - Champion CHST110 User Manual

Product Accessories

Steam head

Product Installation

1. Unpack the machine and stretch the power cord.
2. Take out the water tank, Screw out counterclock
wise the water tank cover, adding water. Then
screw on the cover.
3. Take out the support pole, (as shown in picture),
pull out the Pole 3, screw it clockwise into Pole 4,
then pull out the pole 2, screw it clockwise into
pole3, the last pull out the pole 1, screw it
clockwise into pole 2.
4. Insert the assembled support pole into the hole
on the machine body until it reaches the bottom.
Screw clockwise the snap close of the hole to
fasten the support pole.
1
2
3
6
7
Hook for steam head
4
5
8
9
Hanger Support pole
EN
4