Product Maintenance - Champion CHST110 User Manual

3. Press gently the metal panel of ironing brush on the clothes, move the brush up and down
at such a speed that the steam penetrates the fibers appropriately for hot forming.
4. After ironing the main part, ironing the specific parts from up to down. When ironing the
collar, you may fold the whole collar back, hold one end of the collar by hand, move the
ironing brush horizontally and, during when, be careful of the hot steam.
5. When ironing the sleeves, pull the sleeves to straight and move the ironing brush along the
sleeves.
6. After ironing the front of clothes, turn the clothes over to iron its back.
WARNING: When the steam tube bends, it will emit sound. Hold the handle up to straighten the
tube, sound will stop.

Product Maintenance

• Purified water is recommended in order to avoid contaminating the textiles. The contents of
mineral substance differ in various kinds of water, so there would be sediments to respecti-
ve extents if the ironing machine is applied with water of different qualities, which makes the
steam flow lessens, intermits or even stops. Purified water is recommended in order to avoid
contaminating the textiles.
• To better maintain the machine, the machine, when used for a certain period, may be cleaned
or maintained as follows, in which we suggest taking the steps together:
Cleaning the water tank
Related parts: Water tank and tank filter
Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be
prolonged or shortened according to the actual water quality.
Cleaning steps:
1. Screw out counterclockwise the water tank cover.
2. Pour the remnant water out of the tank.
3. Rinse with clear water the water tank cover as well as the water tank, after which, put the co-
ver back into the bottom of tank and tighten it clockwise.
Using the water outlet to clean the heating element
Related parts: Heating element, metal cleaning plug
Cleaning frequency: Clean every 1 month or 20L water is consumed, which period may be
prolonged or shortened according to the actual water quality.
Precautions: Before cleaning, turn off the power supply, pull out the plug and let the
machine cool down.
Cleaning steps:
1. Turn off the power supply, pull out the plug, take down the support pole, the ironing brush
and tank, pour the remnant water, turn over the machine body on carpet (to avoid
scratching the machine), screw out counterclockwise the cleaning plug and take it out.
EN
6