Advertisement
36x Camera OSD Setting
Adjust BRIGHTNESS during day
time and night time.
Turn on NIGHT LIGHT to
INFRARED.
Note: Adjust BRIGHTNESS under different lighting conditions (day time and
night time). Do not use "Auto Focus" on License Plate Zoom Camera. A vehicle
should be parked at the objective location during the OSD setting when camera
focuses on the vehicle. Adjust Infrared LED activation level (IR) under different
lighting conditions.
Site Application
* Please refer to
www.okinausa.com
5 Rules to Design License Plate Camera Application
* Refer to Operating Manual for more detailed info.
Integrating 36x Camera & IR Housing
36x Camera
2
Control the IR & Camera
IR Cut FIlter work at the same time.
Use only black & red wires.
Adjust SHUTTER SPEED & always
check BRIGHTNESS level.
Always put FOCUS on MANUAL to
stabilize image.
Wire & Cable Requirement
for:
1
RS485 for controlling the 36x camera's OSD functions
Power
Camera adjustments vary depending on application. See below for our
recommended OSD setting.
SYSTEM:
Camera ID: 1 (Default) (If you have more than one PT or PTZ camera,
please change your camera ID fi rst)
PROTOCOL: PELCO-D (You can choose your own protocol based on the
keyboard controller you have)
BAUD RATE: 2400 (You can choose your own BAUD RATE based on the
keyboard controller you have)
CAMERA:
LENS:
FOCUS: Manual (Refer to POSI setting below)
IRIS: Auto
BRIGHTNESS: 6~10 (decided by application type)
DAY/NIGHT: Auto
NIGHT LIGHT: Infrared
IMAGE:
EXPOSURE MODE: Auto
SHUT SPD: 1/1000
BACKLIGHT: BLC Levels: Off or Level 3
PRESET:
PRESET NO.: 1 (If you have more than one PRESET please select the
"to-be-set/desired PRESET NO" from 1-256)
POSI: Up & Down is for ZOOM in and ZOOM out;
Left and Right is for FOCUS.
SAVE: Select SET
and press the SET BUTTON to save the settings.
(Please save after you fi nished the setting for PRESET NO. and POSI)
BNC Video
Bare Wire Power
Not Used
POWER
24V AC 60VA
PTZ
18/2
CONTROLLER
RS485+
RS485-
AUTO
18/2 or 24/2
LENS CTRL
SWITCH
IRIS - OPEN
FOCUS - NEAR
ZOOM - WIDE
IRIS - CLOSE
FOCUS - FAR
ZOOM - TELE
VIDEO
CALL
ON
PRESET
OFF
Balun or
SHOT
CAM/ID
Coax RG59
3
IR & Housing Bracket require
24V AC. Built-in 12V DC Power
Converter for 36x Camera.
IR Brightness Control
4
Need to adjust shutter
speed, brightness, etc.
R062011-V23
1
2
3
4
5
6
7
8
9
CLEAR
0
ENTER
Advertisement
