Sagitter CLUB BEAM 7R User Manual page 25

Manu
Lamp power
DMX Monitor
System Errors
DIS:xxxx-xxx-xxxx
Sys
N:xxxx-xxx-xxxx
DATE:xxxx-xxx-xxxx
TIME:00:00:00
Advan Please input password:
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
• Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
• Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode (SLAV
→ ON).
•
Operate the Master unit in Automatic mode (AU-M) or Musical (SO-M) to operate the entire
system. The entire chain of Slave unit will act as the Master unit.
Reset Ok/Cancel
OFF/ON
EN
YES/NO
Ok/Cancel
25
Reset projector
Burn lamp
Setting language
System errors
System informations
PWD =
UP+UP+UP+DOWN+DOWN+DOWN+ENTER