Installation And Switch - Sagitter CLUB BEAM 7R User Manual

4. - INSTALLATION AND SWITCH ON
4.1 - PRODUCT INSTALLATION
- Do not shake the device. Avoid the use of too much force during installation or unit fixing.
- The unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a
truss.
the mounting of the safety rope (PLH232 – PLH248) sold
WARNING! IT'S REQUIRED
separately) in the case where the product is hung on a
wall, ceiling or on a truss. Except when the device is
placed in the floor, the safety cable is always required.
22