Table of Contents
Advertisement
EN
8
Maintenance and storage | Technical specifi cations
If the pump is permanently installed, the working order of the switching fl oat should be
checked every 3 months.
Any fi brous deposits that could deposit themselves inside the pump, should be removed
using a current of water.
Mud should be cleaned from the fl oor of the pumping pit every 3 months.
Remove deposits on the fl oat using clean water.
Cleaning the pump impeller
If an excessive amount of debris accumulates in the body of the pump, fl ush the pump out with
clean water.
6. TECHNICAL SPECIFICATIONS
Voltage/Frequency
Power input
Maximum transferred amount
Maximum delivery
Maximum submersible depth
Maximum temperature of the media
Maximum value of solid particles in the media
Height of the switching point: On
Height of the switching point: Turned off
FVC 4001-EK
230 V ~ 50 HZ
230 V ~ 50 HZ
750W
12 000 l/h
8 m
8 m
35 °C
Dia. 35 mm
Approx. 50 cm
Approx. 50 cm
Approx. 5 cm
FVC 4001-EK / FVC 4002-EK
FVC 4002-EK
900 W
14 500 l/h
10 m
10 m
35 °C
Dia. 25 mm
Approx. 5 cm
Advertisement
Table of Contents
