Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
5LLR56XXD-V1 Series Fan
RETAILER NAME:
RETAILER ADDRESS:
ETL Model NO. : 5LLR56(X)
8 kgs
17.6 lbs
Total fan weight with light
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5LLR56 D-V1 Series
Summary of Contents for Monte Carlo Fan Company 5LLR56 D-V1 Series
- Page 1 Owner’s Guide and Installation Manual 5LLR56XXD-V1 Series Fan ETL Model NO. : 5LLR56(X) Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8 kgs 17.6 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2014 Monte Carlo Fan Company 12/2017... - Page 3 Phillips screwdriver through the yoke and downrod ( don’t damage the lead wires ) as a guide and then push the cross pin and pull the screwdriver in the meantime as shown in the inset. © 2014 Monte Carlo Fan Company 12/2017...
- Page 4 The splices after being made should be turned upward and pushed carefully up into the outlet box. © 2014 Monte Carlo Fan Company 12/2017...
-
Page 5: Flush Mount Installation
Note : If Installing The Secondary Support Safety Cable in the U.S., Do Not Remove Knockouts In The Outlet Box. © 2014 Monte Carlo Fan Company 12/2017... - Page 6 18 and tighten all screws Repeat this process for remaining blades. securely. Install the blade assembly to motor using the set screws provided. Tighten screws securely Repeat this process for remaining blade assemblies. © 2014 Monte Carlo Fan Company 12/2017...
- Page 7 fixture and attach it with the preassembled set screws on onto light fixture by turning clockwise till light plate and twist clockwise until lock. tight. Reinstall the screw removed in step 23. Tighten all screws securely. © 2014 Monte Carlo Fan Company 12/2017...
-
Page 8: Transmitter Operation
Or you may turn power off for 15 seconds then turn power back, and then turn the fan on, Over load protection (current limit)- The device will limits the maximum current output from the receiver/drive when the fan or light load was increased abnormally. © 2014 Monte Carlo Fan Company 12/2017... - Page 9 4. When fan is turned on or operated forward/reverse function, it shutters & goes back & forth until it turns. It is a normal performance of this fan and it will take for few seconds to run this operation. © 2014 Monte Carlo Fan Company 12/2017...
-
Page 10: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2014 Monte Carlo Fan Company 12/2017... - Page 11 Dec.2017 -V1 edition Jan.2018 update control number...
Need help?
Do you have a question about the 5LLR56 D-V1 Series and is the answer not in the manual?
Questions and answers