General Information / Introduction /Scope Of Supply - BEHA LanTest 50 Instruction Manual

It is recommended that you read and comply with this instruction manual
prior to using the instrument.
Failure to observe the manual or to comply with the warnings and referen-
ces contained herein can result in serious operator injury or instrument da-
mage.
1.0 General Information / Introduction /
Scope of Supply
The instrument BEHAcom LanTest 50 is a portable
cable tester and can be used to test cable continuity and cable assignments of
twisted pairs / 10Base-T (UTP/STP) and Thin Ethernet (BNC).
The cable test is characterised by the following features:
• Verification of wiring errors on LAN cables
• Usable for twisted pair and coax cables
• Detection of cable interruptions, short-circuits, and crossed pairs, split pairs
• Test of shielding
• Detection of cables
• Simple operation via one single push-button
• Green and red LEDs show a good/bad evaluation for each cable pair
• Indicates error codes for each cable pair
• Connection facility for RJ45 and BNC
The scope of suplly contains:
1 LanTest 50
1 Coding female plug
1 Patch cable RJ45 (300mm)
1 Coupling, RJ45-RJ45
1 Battery IEC 6LR61
1 Carrying case
1 Instruction manual
23