Contents:
1.0
2.0
3.0
4.0
Testing............................................................13
4.1
4.2
5.0
6.0
Maintenance ..................................................14
6.1
6.2
Replace lamp ..................................................15
7.0
References marked on the instrument or in the
instruction manual:
Attention! Characterises a dangerous spot, respect
instruction manual
Caution ! Dangerous voltage
Symbol for the marking of electrical and electronic
equipment (WEEE Directive).
Conformity symbol, the instrument complies with the
valid directives.
1.0 Introduction / Scope of Supply
The Continuity and Line Tester TESTFIX is appropria-
te for continuity testing of electronical wiring, line
networks, systems, instruments and components of a
measurement impedance of 100 Ω.
The insturment is equipped with an additional, incor-
porated torch function with a steady burning light, fa-
cilitating any testing in dark switch cabinets or in case
of diffuse lighting.
• Acoustic and optical continuity indication
• Torch function
• Resistance range up to 100 Ω
• Fixed mounted test leads with test probes (2 mm)
• Cable bending protection directly formed at casing
• Schock-proof instrument construction
• Unbreakable, impact-proof ABS synthetic casing
10
Page