Introduction / Scope Of Supply - BEHA UNITEST 2000 alpha Instruction Manual

Instruction Manual
Contents
1.0 Introduction / Scope of Supply ..............................11
2.0 Safety Measures ....................................................12
3.0 Control Elements and Connections ........................13
4.0 Carrying out Measurements ..................................14
4.1 Preparation and Safety Measures ..........................14
4.2 Voltage Test ............................................................14
4.3 Single-Pole Phase Test ..........................................15
4.4 Voltage Test with RCD Trip Test ..............................15
4.5 Restistance Measurement (only 2000 gamma) ......15
4.6 Continuity Test / Diode Test ....................................16
4.7 Rotary Field Indication............................................16
4.8 Measurement Point Illumination ............................16
5.0 Maintenance ..........................................................17
5.1 Cleaning ................................................................17
5.2 Calibration Interval ................................................17
5.3 Battery Replacement ..............................................17
6.0 Technical Data ........................................................18
24 month warranty ................................................19
References marked on instrument or in instruction
manual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Continuous double or reinforced insulation complies
with category II IEC 61140.
Insulated personnel body protective equipment up to 690V
Symbol for the marking of electrical and electronic
equipment (WEEE Directive 2002/96/EC).
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC), Standards EN 50081-1 and EN 50082-1
are fulfilled. It also complies with the Low Voltage Direc-
tive (73/23/EEC), Standard EN 61010-1is fulfilled.
The instruction manual contains information and refe-
rences, necessary for safe operation and maintenance of
the instrument.
the instruction manual and comply with it in all
sections.
Failure to read the instruction manual or to comply with
the warnings and references contained herein can result
in serious bodily injury or instrument damage.

1.0 Introduction / Scope of Supply

The UNITEST 2000 instruments are voltage and continuity te-
sters with rotary field indication for universal applications. The
voltage testers are constructed in accordance with the newest
safety prescriptions and guarantee safe and reliable measure-
ment and testing. The risk of injury when transporting the in-
strument in clothing pockets or in the tool box is eliminated due
to the fixed test probe cover, as required by VBG 1 (BG) § 35
Prior to using the instrument read
page
11