Receiver; Emergency-Move-Down - LOGICDATA IRR-3MAS-SET Operation Manual

Set up channel 1:
Bring the channel switch to the leftmost position.
Now channel 1 is selected.
Set up channel 2:
Bring the channel switch to the rightmost position.
Now channel 2 is selected.

Receiver

The channel can be set up by the channel switch.
Set up channel 1:
Bring the channel switch to the leftmost position.
Now channel 1 is selected.
Set up channel 2:
Bring the channel switch to the center position.
Now channel 2 is selected.
Emergency-Drive-Down
With this functions all drives can be driven down slowly.
Bring the switch at the receiver to the rightmost position.
Now all drives move slowly to their lower end-position.
Attention:
The emergency-drive-down only works, if no mains voltage is
applied to the system! Also a battery have to be connected to the
bed-control-system!
- 22 -