Characteristics And Functions; Installation And Start-Up; Putting Batteries Into The Ir-Transmitter - LOGICDATA IRR-DDSET Operation Manual

Characteristics and Functions

This IR-system can control a Bed-Control-System with two drives-
The drives can be driven both separately and simultaneously.
With two keys you can set-up two different channels for operating two different
systems.

Installation and Start-up

Putting the Batteries into the IR-transmitter:
Ø
Remove the cover of the battery box.
Ø
Put both original batteries into the battery box. Please pay attention to the
correct polarity.
Ø
Close the cover of the battery box again..
Live-cycle of the batteries:
It the Remote-Control does not work correctly any more, both batteries have to be
changed. Please bring old batteries to the hazardous substance collection.
Notes for batteries:
To avoid any damage caused by leakage or corroding of the batteries, please pay
attention to the following notes:
· Pay attention to the correct polarity when putting the batteries into the battery
box.
· Never use old and new batteries or batteries of different types together.
· Do not charge arid batteries.
· If you intend to not use the Remote-Control for a longer time, please remove
both batteries. If a battery leaks, clean the battery box and replace all
batteries.
- 12 -