Tripp Lite B127A-002-BH Owner's Manual page 17

Installation
8. Connect the external power supply to the splitter unit. Plug
it into an available wall outlet or a Tripp Lite surge protector,
power distribution unit (PDU) or uninterruptible power supply
(UPS). The POWER (green) LED on the local splitter unit will
illuminate to indicate the unit is receiving power from the
external power supply. The POWER (green) LED on the remote
receiver unit's RJ45 port will illuminate to indicate the unit is
receiving power from the local transmitter unit through PoC
technology.
9. Turn on the power to the HDMI source. The RJ45 (orange)
LED will illuminate on both the local transmitter and remote
receiver units to indicate a signal is being received from the
source to display. The screen should now display on the
connected monitor(s).
-08-019-933DB9-EN.indd 17 -08-019-933DB9-EN.indd 17
17
8/24/2021 3:07:49 PM 8/24/2021 3:07:49 PM