Tripp Lite B127A-002-BH Owner's Manual page 11

Installation
B127A-002-BHPH2
1
2
1. Make sure all equipment in the installation—such as TVs,
Blu-ray™ players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT
or P568-XXX-2A Series cables), connect the HDMI source to
the INPUT port on the local transmitter unit.
3. Optional: For extended range, connect up to two
B127A-010-H signal repeater units to the splitter and each
receiver via Cat6 cabling.
4. Using Cat6 cable (such as Tripp Lite N202-Series 24 AWG
Cat6 Cabling), connect the RJ45 port on the local splitter unit
to the RJ45 port on the remote receiver unit.
-08-019-933DB9-EN.indd 11 -08-019-933DB9-EN.indd 11
Up to 230 ft. (70 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
HDR PLAYER B127A-1P0-PH
B127A-002-BH
B127A-1P0-PH
11
8/24/2021 3:07:48 PM 8/24/2021 3:07:48 PM