Tripp Lite B127A-002-BH Owner's Manual page 13

Installation
Standard Splitter Kit Installation
(4-Port Models)
Notes:
1) Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded wire Cat6 cable or cable with a gauge
(AWG) size higher than 24 AWG will result in shorter extension distance.
Higher gauge cabling, such as 26 AWG, has a more limited transmission
capability than lower gauge cabling. All Tripp Lite N202-Series Cat6
cables are made with 24 AWG solid wire cabling.
3) The first installation diagram shows a B127A-004-BHPH3 kit, which
includes a B127A-004-BH splitter unit and three B127A-1P0-PH receiver
units. The second diagram shows a B127A-004-BH splitter unit with an
included B127A-1P0-PH receiver and additional B127A-1A0-BH,
B127A-1A0-FH and B127A-2A0-FH receiver units (sold separately at
tripplite.com).
4) External power is not required for remote receiver units because of
Power over Cable (PoC) technology incorporated in the transmitter units.
-08-019-933DB9-EN.indd 13 -08-019-933DB9-EN.indd 13
13
8/24/2021 3:07:48 PM 8/24/2021 3:07:48 PM