Operation; To Navigate Through The Menus - EchoStar AD-3600 IP Viaccess User Manual

OPERATION

1.

TO NAVIGATE THROUGH THE MENUS

NOTE
Unless otherwise specified; this note explains the way you can navigate through
the pages of the EchoNAV user menu.
1. Use the OK key to pull down the menu selection fields.
2. Use the
3. Use the
items.
4. Use the EXIT key to leave the menu and return to the view mode.
5. In a pull-down menu:
- use the OK key to confirm the selection.
- the yellow bar indicates the active selection;
- on the left, the green page indicator indicates where you are.
NOTE
In the following procedures, we assume that you have switched on the TV and the
receiver is in the TV mode.
1.1. TO SELECT A MODE
1. On the RCU, press the OK key;
2. Press the RED key and make the selection.
3. Read the available help text for information.
4. Select the required mode.
1.2. TO SELECT A CHANNEL
1. On the RCU, press the OK key.
2. Select the required mode.
3. Read the available help text for information.
4. Select a channel, either:
a. use the
b. use the page + / - keys;
c. use the numbered keys.
5. On the RCU, press the OK key to confirm.
NOTE
Normally, you only can view a scrambled channel with the applicable CI-module
and/or smart card inserted in a CI-slot or Viaccess smart card reader.
Digital Satellite Receiver
keys to scroll the selectable items.
keys to navigate between the left and right column of selectable
keys;
Operation
Section 5
Page 5 - 1
5