Related Manuals for EchoStar D-2510 IP Viaccess
Summary of Contents for EchoStar D-2510 IP Viaccess
-
Page 1: User Manual
User Manual DIGITAL, POSITIONER RECEIVER WITH EMBEDDED VIACCESS AND COMMON INTERFACE... -
Page 2: Table Of Contents
This will enable your receiver to function properly. Irregularities can be expected when unapproved C.I. modules are utilized, and EchoStar cannot and will not be held responsibl e for the performance of such modules. If you choose to utilize an unapproved conditional access module with your EchoStar receiver, EchoStar will be unable to provide any support or assistance for the receiver. -
Page 3: Safety Instructions
1. Safety Instructions WARNING! Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. Do not use accessories or attachments not recommended by the receiver manufacturer, as they may cause hazards and will void the warranty. -
Page 4: Features
18. Teletext function (Your TV should support teletext) & Subtitling 19. Favorite channel function 20. SCPC/MCPC receivable from C/Ku-band satellites 21. Proprietary Echostar OSG menu for full integrated functions 22. Last channel memory function 23. Variable aspect ratio (4:3, 16:9) with pan vector 24. -
Page 5: Front & Rear View
3. Front & Rear View Front Panel Front Panel Channel up / down 1 Smart card slot Selection / confi rmation Volume up / down 2 Slots for CI module ON/Standby Rear Panel Rear Panel AC power cord Antenna input LNB input Loop through RF output connector to TV... -
Page 6: Remote Control Unit (Rcu)
4. Remote Control Unit (RCU) The Power key turns the receiver on and off. The LED (Light Emitting Diode) flashes red to show the remote is working. The TV, VCR and SAT keys select the device to be controlled. Pressing the SAT key allows the remote to control the functions of the receiver. - Page 7 Smart Card and CI Module To watch payable program channels, a CI module and a smart card from the service provider is necessary. (The service provider is the distributor of the programs). CI modules and smart cards are only licensed to service providers only and they are distributed by their dealers or agents.
-
Page 8: Getting Started
3. Connect the RF OUT of the VCR to the RF IN of the TV set. 4. Search on the TV set and the VCR for UHF channel # 38. This is the default channel where the EchoStar D-2510IP VIACCESS is programmed to. - Page 9 3. Connect the RF OUT of the VCR to the RF IN of the TV set. 4. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar D-2510IP VIACCESS is programmed to. 5. Connect the SCART cable from the TV SCART of the EchoStar D-2510IP VIACCESS to the SCART of the TV set.
- Page 10 2. Connect the TV OUT socket of the EchoStar D-2510IP VIACCESS to the RF IN of the VCR. 3. Connect the RF OUT of the VCR to the RF IN of the TV set. 4. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar D-2510IP VIACCESS is programmed to.
-
Page 11: How To Connect Your Dish To The Echostar D-2510Ip Viaccess
6. How to connect your dish to the EchoStar D-2510IP VIACCESS One Actuated Dish 1. Connect the LNB IN socket of the EchoStar D-2510IP VIACCESS to the LNB. 2. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction. - Page 12 Two Fixed Dishes using DiSEqC mode 1. Connect the DiSEqC 1.0 or Toneburst switch to the LNB IN connector of the EchoStar D-2510IP VIACCESS. 2. Connect both dishes to the 2 inputs from the DiSEqC switch. FIXED DISH # 1...
-
Page 13: Operation And Menu Program
Installation Check the To get the most out of the EchoStar D-2510IP VIACCESS it should be correctly installed, the dish should be optimally aligned and the mechanical limit switched on the dish should be set properly. Press the remote control unit (RCU) or press switch the unit on. - Page 14 Antenna Installation First the east and west limits have to be set before any satellites can be programmed. Press the key on the “East Limit” parameter line. The initial value of 5000 will decrease as the dish i s moved. Keep moving the dish unit until the east li mit is reached.
- Page 15 Press the MENU key twice to return to the installation screen. Select Auto Search (for more information on this option please refer to page 20). The EchoStar D- 2510IP VIACCESS will start the search on the most eastern satellite.
- Page 16 Program Satellites The EchoStar D-2510IP VIACCESS now has programmed the position of all selected satellites. The next step is to store all channels on these satellites. To do this press the MENU key, select the Installation option followed by the Program Satellites option.
- Page 17 Local Time Setting A/V Output Setting About Echostar You can select the desired language for the OSG (On-Screen Graphics) display using the , keys when the “Menu Language” option is selected. Similarly you can selected a different audio channel when the “Audio Language”...
- Page 18 UHF frequency is set automatically according to the channel selection. About EchoStar Here you can find the information about our co mpany. If you have any questions about the EchoStar D-2510IP VIACCESS, firstly contact your loca l dealer. A/V Output Setting...
-
Page 19: Main Menu & Installation
B. Main menu and Installation Main Menu Press the MENU key to display the “Main Menu” o n the screen. Select a sub-menu using the , keys or the numeric k eys. Please note that the OK key is always a confirma tion of your selection. - Page 20 Auto Search Using the Auto Search option, the EchoStar D-2510IP VIACCESS searches for all available channels(Radio an d TV) on the currently selected satellite. The names of th e found TV channels are shown on the left and the total n umber of found TV and Radio channels are mentioned o n the right.
- Page 21 TV Channels You can select the channel you would like to watch either b y pressing the numeric keys for the channel number or by m oving the highlighted bar to the channel of your choice usin g the , keys. Press the OK key to select the channel. * Press the , keys to move one page up or down.
- Page 22 You can edit “VCR Timer” only after you put in all the data in the “Local Time Setting” Total of 5 events are programmable for your VCR recording with the EchoStar D-2510IP VIACCESS. Select an event number from 1 to 5, choose your...
- Page 23 Edit TV Channel The “Enter PIN code” menu is displayed only when the Installation and Edit Lock is set as [ON]. The ini tial code is set as [0000] but you can change it (See “Change PIN code” on page 20). Edit Edit TV Channel Edit Radio Channel...
- Page 24 Edit Transponder To delete a transponder, press the red key when the highlighted bar is located at the transponder you want to delete. To add a transponder, press the blue key. Then, the “Edit/Add SAT or TP” menu will be displaye d, and you can add a transponder in that menu.
- Page 25 ALT Audio If more than one audio channel is provided by the broadcaster on a specific channel, you can activate the audio mode display by pressing the key. Guide While watching or listening to any channel if you want to know more information regarding the program shown, press the EPG key on the remote control to display the “TV Guide”...
-
Page 26: Advanced Installation
C. Advanced Installation Advanced Installation You can select the “Advanced Installation” menu on the “Installation” menu of Main menu by using the Channel up/down keys (Ù,Ú). Edit/Add SAT or TP Edit/Add SAT or TP Satellite Longitude TP / Signal Quality LNB polarization Symbol Rate Channel Name... - Page 27 Edit LNB Local Frequency You can edit up to 8 local frequencies by using numeric keys. And if you want to save the newly edited frequency, pres s the OK key. Reset (Factory Default) If you want to reset all the data edited, press the red but ton twice.
-
Page 28: Specifications
6. Specifications 1. Tuner & Channel Input Connector Output Connector Frequency Range Input Impedance Signal Level IF Frequency IF Bandwidth LNB Power & Polarity control. 22KHz Tone Demodulation Input Symbol Rate FEC Decoder 2. MPEG Transport Stream A/V Decoding Transport Stream Profile &... - Page 29 S/PDIF out Analog Audio Out Data Interface 5. PCMCIA Number of Slot Type 6. Conditional Access Embedded Viaccess 7. RF Modulator RF-Connect Output Frequency Output Channel TV Standard 8. Power Supply Input Voltage Type Power Consumption Protection 9. Physical Specification Size(W x H x D) Weight 10.