EchoStar AD-3600 IP Viaccess User Manual page 49

3.1. TO SET A TIMER
CAUTION
Note that the VCR timer does not start or program your video recorder (VCR). You
have to set the timer of your VCR also to the same time as on the receiver. Please
refer to the user's guide of your VCR how to record from a satellite receiver. On
quite a lot of VCRs you have to select the so called external channel (E1)
NOTE
You cannot set a timer in the past or on a program that has already begun.
1. On the RCU, press the EPG key.
2. If EPG data is available, select a program in the
future (right of the red line in the EPG window);
3. If no EPG data is available, select the correct
channel.
4. On the RCU press the YELLOW key.
5. Read the available help text for information.
6. Select the required timer.
7. When the timer appears, if necessary:
8. Change the date:
a. use the
b. read the available help text for information;
c. press the OK key to change the date;
d. in the calendar, select the required date;
e. press the OK key to return to the timer.
NOTE
Be aware that the shown EPG start/stop time might
not be the same as the actual start/stop times,
because of last minute program changes.
9. Change the start time:
a. use the
b. read the available help text for information;
c. press the
d. press the OK key to go to the minutes;
e. press the
Digital Satellite Receiver
key, to go to the date;
key, to go to the start time;
keys to set the hours;
keys to set the minutes.
Operation
Section 5
Page 5 - 11
5