GE RAK148P2 Owner's Manual & Installation Instructions page 15

9. Press the Hold button to advance to the next screen parameter.
• Heat temperature is displayed (60°F to
85°F) / (15°C to 29°C).
Note: Transitions required after 11:59 PM
must be programmed in the next days
MORN period.
10. Press the
11. Press the Hold button to advance to the next screen.
• Cool temperature is displayed (60°F to
85°F) / (15°C to 29°C).
12. Press the
13. Press the Hold button to advance to the next screen.
Repeat steps 1–13 to program each day of the week
individually.
Note: When programming is complete, slide the Function
switch to Heat or Cool to exit Programming Mode.
or button to adjust heat set temperature.
or button to adjust cool set temperature.
HEAT
:
AM DAY
PROG MORN
COOL
:
AM DAY
PROG MORN
15