GE RAK148P2 Owner's Manual & Installation Instructions page 14

Programming.
Program Overview
The programmable thermostat has four periods (MORN, DAY, EVE,
NITE) that are customizable for each day of the week. Each period
will have a set time, heat temperature and cool temperature. The
thermostat monitors the day and time, while maintaining the specific
conditions that you have chosen for each period in the program.
Note: Operation being set will blink in the display.
1. Place the Function switch in the
Off position.
2. Press the Hold button in
for 6 seconds.
3. Press the Hold button 3 times.
• DAY (01–07) and PROG is displayed.
4. Press the
day you want to program (01-05 =
Monday – Friday individually, 67 =
program Saturday and Sunday at the same time, 17 =
program every day of the week at the same time, 15 =
program Monday – Friday at the same time).
5. Press the Hold button to advance to the next parameter.
• Period is displayed (MORN, DAY, EVE,
NITE).
Note: You can always press the
Mode button to return to the previous
parameter.
6. Press the
display should blink the period of the day.
7. Press the Hold button to advance to the
next parameter.
• Set time is displayed.
8. Press the
button once, and then press the
minutes.
14
or button to change the
or button to change period of day. The
or button to adjust hours. Press the Hold
DAY
PROG
DAY
PROG MORN
:
AM
PROG MORN
or buttons to adjust