Programming - GE RAK148P2 Owner's Manual & Installation Instructions

Programming.

Factory Programming Settings
The programmable thermostat comes preprogrammed with the
following schedule:
MONDAY MORN 6:00 AM DAY 8:00 AM EVE
through HEAT
SUNDAY COOL
Setting the time and day of the week
The time and day of the week must be set for the program
schedule to operate correctly.
1. Slide the Function switch to the Off
position.
2. Press the Hold button
in for 6 seconds.
3. Press the
time in hours. Press
the Hold button once. Now press
the or
the time in minutes.
4. Press the Hold button while
the time is displayed. The display shows
the day currently set on
the thermostat (01 = Monday,
02 = Tuesday, etc.).
5. Press the
week.
6. Press the Hold button to go to the programming schedule or
slide the Function switch to Cool or Heat positions to lock the
values into memory.
70°F HEAT
78°F COOL
or button to adjust the
button to adjust
or button to set the current day of the
6:00 PM NITE 10:00 PM
62°F HEAT 70°F
85°F COOL 78°F
HEAT 62°F
COOL 82°F
:
PM
OFF
:
PM
:
TODAY
PM
13