Racelogic VBOX Video HD2 User Manual page 31

The logging behaviour of VBOX Video HD2 is totally user configurable, so can be altered to suit different requirements.
As well as logging Only when moving, the HD2 can also be set to log Continuously, Manually or by using Advanced
logging options. For more information on logging settings, please click here.
Logging behaviour
The Blue Record LED will be on when recording video. When you come to a stop, it will then flash as the file is closed
and will go out when it is safe to remove the SD card.
IMPORTANT – NEVER remove the SD card when the Blue Record LED is on or flashing - you will lose data/
video!
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC before it
can be reused.
If you have come to a stop, but the LED is on, press the 'RECORD' button to stop the video before removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the car is
stationary. Always check the Blue LED before ejecting the card.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/04_-
_HD2_Logging
31