Software Installation - Racelogic VBOX Video HD2 User Manual

01 - HD2 Introduction
VBOX Video HD2 is a dual camera, 1080p, 30 or 60 fps video system including 10 Hz GPS data-logging and a live
graphical overlay. The HD2 is compatible with OLED systems, as well as Racelogic modules, such as the Micro Input
Module and Mini Input Module.
An HDMI variant is available which enables streaming of real-time video from the HD2 to an HDMI compatible monitor,
recorder or streaming device.
The HD2 works straight out of the box with no need for configuration.
Included on the SD card are two software programs:
• VBOX Video Software
• Circuit Tools Software
times in a single session.
Both of these software programs can be
VBOX Video Registration
So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to
offer technical support, please register your VBOX Video.
Please register your unit

Software Installation

Software installers for both Circuit Tools and VBOX Video Setup are both found on the SD card included with the HD2.
To install the software, insert the SD card into the SD card reader of your computer or download the software from the
above link. Double click the setup.exe file and follow the steps until the software is successfully installed.
IMPORTANT – Microsoft Windows 7 SP1 and VBOX Video HD2 Firmware version V1.3.72 or newer is required
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/01_-
allows you to configure and customise all areas of your VBOX Video system.
can be used to analyse video and data files, allowing customers to shave seconds off lap
downloaded from
here
Click here for a step by step quick start guide.
here.
_HD2_Introduction
2