Chapter 2 Preparations
10. Connect the SAS cable (long) provided with 2.5-inch additional HDD cage to Expander Board,
factory-installed HDD cage, and additional HDD cage.
11. Connect the provided SGPIO cable to factory-installed HDD cage and additional HDD cage.
12. Install support bar, PCI riser card, and then install the top cover.
13. Attach the ID label to the front face of chassis.
1.19.2 Removal
To remove an additional HDD cage, reverse the installation procedure above.
110
Note
Keep the removed blank cover for future use.
Important
To maintain the cooling effect in the server, install the blank cover in the
vacant slot.
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices