Supermicro A+ AS-1114S-WTRT User Manual page 85

Network Configuration

(Available when EFI is selected in LAN OPROM after reboot.)
VLAN Configuration (LAN1 and LAN2)
Enter Configuration Menu

Create New VLAN
VLAN ID
This option is an input field used to enter a unique numeric VLAN ID. The valid range is
from 0~4096.
Priority
This option is an input field used to enter a unique numeric VLAN 802.1Q priority. The
valid range is from 0~7.
Add VLAN
Click this option to create the new VLAN.
Configuration VLAN List
Remove VLAN
Click this option to remove an existing VLAN.
IPv4 Network Configuration
Configure
Select Enabled to activate !Pv4 network configuration. The options are Enabled and Disabled.
*If the item above is set to Enabled, the following item will become available for
configuration:
Enable DHCP
This feature allows the user to select the source of the IP address for this computer. If
Disabled is selected, you will need to know the local IP address of this computer and enter it
to the system manually in the field. If Enabled is selected, the system will search for a DHCP
(Dynamic Host Configuration Protocol) server in the network that it is attached to and request
the next available IP address for this computer. The options are Enabled and Disabled.
*If the item above is set to Disabled, the following items will become available for
configuration:
85
Chapter 6: UEFI BIOS