A+ Server AS -1114S-WTRT User's Manual
Removing a Hot-Swap Drive Carrier
1. Push the release button on the carrier.
2. Swing the handle fully out.
3. Grasp the handle and use it to pull the drive carrier out of its bay.
3
2
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs for AS -1114S-WTRT, visit the Supermicro
website at https://www.supermicro.com/products/nfo/AMD_SP3.cfm?pg=SS, and click
AS -1114S-WTRT, then Drive Options.
1
Figure 3-16. Removing a Drive Carrier
38