SAFETY GUIDELINES
• NEVER OPEN THIS FIXTURE WHILE IN USE!
•
During the initial operation of this fixture, a light smoke or smell may emit from the interior of the
fixture. This is a normal process and is caused by excess paint in the interior of the casing burn-
ing off from the heat associated with the lamp, and will decrease gradually over time.
•
This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS ONLY on
stage, in nightclubs, theatres, etc.
•
In order to avoid the risk of fire, please make sure there are NO FLAMMABLE MATERIALS close
to the fixture while it is operating.
•
The fixture must be installed in a location with adequate ventilation, at least 1.5 feet (.5m) from
adjacent surfaces. Be sure no air ventilation slots are blocked.
•
DO NOT attempt installation and/or operation without knowledge how to do so.
•
DO NOT permit operation by persons who are not qualified to operate this type of fixture.
Consistent operational breaks may ensure the fixture will function properly for many years to
come.
•
DO NOT shake the fixture, and avoid brute force when installing and/or operating fixture.
•
Always install the fixture with an appropriately rated safety cable. When installing the fixture in a
suspended environment, always use mounting hardware that is no less than M10 x 25 mm, and
also be sure the hardware is inserted securely in the pre-arranged screw holes in the bracket of
the fixture.
•
Use the original packaging and materials to transport the fixture for service.
•
DO NOT TOUCH the housing with bare hands during operation. Turn OFF the power and allow
approximately 15 minutes for the fixture to cool down before replacing or serving.
8