Mitsubishi Electric FR-A862-E Instruction Manual page 17

Removal and reinstallation of the front covers
Reinstallation of the front covers
(a)
(a) Insert the upper hooks of the front cover (upper side) into the sockets of the inverter.
Securely install the front cover (upper side) to the inverter by fixing the hooks on the sides of the cover into place.
(b) Tighten the mounting screws at the lower part of the front cover (upper side).
(c) Fasten the front cover (lower side) with the mounting screws. (The number of the mounting screws differs by the capacity.)
NOTE
• When installing the front cover (upper side), fit the connector of the operation panel securely along the guides of the PU
connector.
• Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front covers.
16
INSTALLATION AND WIRING
(b)
Fasten Fasten Fasten
(c)
Fasten Fasten Fasten